Sebagian informasi produk masih tersedia dalam bahasa Inggris.
FORCE NC
Non-compliant high-pressure PTCA balloon catheter for precise coronary post-dilatation.
Gambaran umum
Gambaran dan kegunaan produk
FORCE NC combines high rated burst pressure, low balloon growth, hydrophilic coating, and a three-fold heated balloon design for controlled coronary post-dilatation.
Intended for balloon dilatation of stenotic coronary arteries or bypass graft stenoses and coronary stent optimization workflows.
Keunggulan
Mengapa produk ini
Keunggulan dan fitur utama produk.
High-Pressure Balloon
12 bar nominal pressure with rated burst pressure up to 21 bar.
Non-Compliant Control
Approximately 1% balloon growth per atmosphere between nominal and rated burst pressure.
Hydrophilic Coating
Coated distal shaft, balloon, and tip reduce friction during lesion crossing.
Three-Fold Design
Wingseal three-fold heated balloon design supports tight wrapping and repeated inflation.
Data teknis
Spesifikasi produk
Hanya data produk yang tersedia yang ditampilkan. Hubungi PT BAS untuk dokumen resmi terbaru.
| Spesifikasi | Nilai |
|---|---|
| GeneralCatheter Type | Rapid exchange, non-compliant |
| PressureNominal Pressure | 12 bar |
| PressureRated Burst Pressure | 21 for 2.00-3.00 mm; 19 for 3.25-4.50 mm bar |
| MaterialBalloon Material | Non-compliant polyamide/polyether block amide |
| DeliveryEffective Catheter Length | 154 cm |
| CompatibilityGuidewire | Maximum 0.014 (0.36 mm) inch |
| CompatibilityGuiding Catheter | Minimum inner diameter 5F (1.42 mm) |
| ProfileLesion Entry Profile | 0.016 (0.40 mm) inch |
| ProfileProximal Shaft | 1.9F (0.64 mm) hypotube |
| ProfileDistal Shaft | 2.7F (0.90 mm) |
| DeliveryGuidewire Exit | 25 cm from tip |
| PerformanceDeflation Time | <30 depending on balloon size seconds |
| TechnicalBalloon Markers | One marker at 5 mm length; two markers at other lengths |
| SterilizationMethod | EtO sterilization |
| StorageShelf Life | 3 years |
Konfigurasi
Informasi Pemesanan FORCE NC
Pilih kode produk berdasarkan diameter dan panjang stent.
| Balloon Length | Balloon Diameter | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 2.00 mm | 2.25 mm | 2.50 mm | 2.75 mm | 3.00 mm | 3.25 mm | 3.50 mm | 3.75 mm | 4.00 mm | 4.50 mm | |
| 5 mm | XFOR2005 | XFOR2205 | XFOR2505 | XFOR2705 | XFOR3005 | XFOR3205 | XFOR3505 | XFOR3705 | XFOR4005 | XFOR4505 |
| 10 mm | XFOR2010 | XFOR2210 | XFOR2510 | XFOR2710 | XFOR3010 | XFOR3210 | XFOR3510 | XFOR3710 | XFOR4010 | XFOR4510 |
| 15 mm | XFOR2015 | XFOR2215 | XFOR2515 | XFOR2715 | XFOR3015 | XFOR3215 | XFOR3515 | XFOR3715 | XFOR4015 | XFOR4515 |
| 20 mm | XFOR2020 | XFOR2220 | XFOR2520 | XFOR2720 | XFOR3020 | XFOR3220 | XFOR3520 | — | XFOR4020 | XFOR4520 |
| 30 mm | — | — | — | — | — | — | — | XFOR3730 | — | — |
Dokumen produk
Brosur resmi produk
Unduh brosur FORCE NC untuk informasi produk terperinci.
Principal / merek
Bluemedical
Hubungi tim kami untuk informasi principal, merek, dan dokumen produk.
Catatan regulasi
Status produk terbaru
Product availability, indications, and regulatory status may vary. Contact PT BAS for current product information and documentation.
Produk terkait
Produk lain dari Coronary
EVEREST PTCA
Semi-compliant rapid-exchange PTCA balloon catheter for coronary dilatation workflows.
Lihat produk
SUMMIT CTO
Low-profile semi-compliant PTCA balloon catheter designed for CTO and tight lesion crossing.
Lihat produk
RESTORE DEB
Paclitaxel releasing PTCA balloon catheter powered by SAFEPAX technology.
Lihat produk
EVROCROSS
Everolimus eluting cobalt chromium coronary stent system with a biodegradable polymer coating.
Lihat produkHubungi kami
Butuh FORCE NC untuk rumah sakit atau cath lab Anda?
Hubungi PT BAS untuk penawaran, ketersediaan, dan dokumen pendukung.